APC SRT5KXLI Smart-UPS SRT 5000VA 230V – Black

  • Output power capacity 4.5 KWatts / 5.0 kVA
  • Max Configurable Power (Watts) 4.5 KWatts / 5.0 kVA
  • Nominal Output Voltage 230V
  • Output Voltage Distortion Less than 2%
  • Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
  • Other Output Voltages 220,240
  • Load Crest Factor 3: 1

8,700.00 AED

16 People watching this product now!

Payment Methods:

Overview

 

SRT5KXLI Features

Run time for load : 3m 59s

Max. Capacity Used :100%

Output power capacity :4.5kWatts / 5.0kVA

Output Connections

(4) IEC 60320 C19 (Battery Backup)
(6) IEC 60320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)

Nominal Output Voltage : 230V

Nominal Input Voltage :230V

Input Connections :Hard wire 3-wire (1P + N + E)

APC Smart-UPS SRT 5000VA, 230V, LCD, rackmount w/kit, 6x IEC 60320 C13 & 2x IEC Jumpers & 4x IEC 60320 C19 outlets

APC Smart-UPS SRT 5000VA, 230V, LCD, rackmount w/kit, 6x IEC 60320 C13 & 2x IEC Jumpers & 4x IEC 60320 C19 outlets

High density, double-conversion on-line power protection with scalable runtime.
Includes: CD with software, Communication cable, Documentation CD, Installation guide, Removable support feet, Temperature probe, USB cable, Warranty card, Web/SNMP management card
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Green mode :Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • LCD graphics display:Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-Line Features & Benefits

Adaptability

Rack/Tower convertible :Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Plug-and-Play external batteries :Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Flash upgradeable firmware :Install maintenance releases of firmware remotely using FTP.

Availability

Automatic internal bypass :Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Temperature-compensated battery charging :Prolongs battery life by regulating the charge voltage according to battery temperature.

Scalable runtime :Allows additional run time to be quickly added as needed.

Intelligent battery management :Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries :Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown :Automatically starts up the connected equipment upon the return of utility power.

Manageability

Serial connectivity:Provides management of the UPS via a serial port.

Network manageable :Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

LED status indicators :Quickly understand unit and power status with visual indicators.

Intelligent Card Slot :Customize UPS capabilities with management cards.

InfraStruXure Manager Compatible:Enables centralized management via the APC InfraStruXure Manager.

Marketing features

Avoids costly power problems by keeping your IT equipment and data protected and available .

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Low operating and maintenance costs with proven reliability and intelligent battery management .

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Protection

Cold-start capable :Provides temporary battery power when the utility power is out.

Power conditioning :Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction :Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible:Ensures clean, uninterrupted power to protected equipment when generator power is used.

Frequency and voltage regulation :Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Safety-agency approved :Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Resettable circuit breaker :Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Serviceability

Predictive failure notification:Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification :Warns when a battery is not available to provide backup power.

Automatic self-test :Periodic battery self-test ensures early detection of a battery that needs to be replaced.

User-replaceable batteries :Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Audible alarms:Provides notification of changing utility power and UPS power conditions

APC Smart-UPS SRT 5000VA, 230V, LCD, rackmount w/kit, 6x IEC 60320 C13 & 2x IEC Jumpers & 4x IEC 60320 C19 outlets

 

Detailed Tech Specification

 

Output

Max Configurable Power (Watts) :4.5kWatts / 5.0kVA

Output Voltage Distortion :Less than 2 %

Output Frequency (sync to mains):50/60 Hz +/- 3 Hz Sync to mains

Other Output Voltages :220 V, 240 V

Load Crest Factor:3 : 1

Topology :Double conversion online

Waveform type :Sine wave

Bypass :Internal bypass (automatic and manual)

Input

Input frequency :40 – 70 Hz Auto-sensing

Input voltage range for main operations :100 – 275 Adjustable (half load)V

Other Input Voltages :220 V, 240 V

Batteries & Runtime

Battery type :Lead-acid battery

Included Battery Modules :2

Typical recharge time :1.5hour(s)

Nominal Battery Voltage :192 V

Replacement Battery :APCRBC140

Expected Battery Life (years) : 3 – 5

RBC Quantity : 1

Battery Charge Power (Watts) :560 Watts

Extendable Run Time :1

Efficiency :View Efficiency Graph

Communications & Management

Interface Port(s) :RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB

Control panel:Multifunction LCD status and control console

Audible Alarm :Audible and visible alarms prioritized by severity

Emergency Power Off (EPO):Yes

Available SmartSlot™ Interface Quantity:1

Surge Protection and Filtering: Surge energy rating  480Joules

Physical

Maximum Height: 432MM, 43.2CM

Maximum Width :130MM, 13.0CM

Maximum Depth :719MM, 71.94CM

Net Weight :54.43KG

Shipping weight :63.6KG

Shipping Height :330MM, 33.0CM

Shipping Width :610MM, 61.0CM

Shipping Depth :960MM, 96.0CM

Color :Black

Units per Pallet :6.0

Environmental

Operating Temperature :0 – 40 °C

Operating Relative Humidity :0 – 95 (Non-condensing) %

Operating Elevation :0 – 3048meters

Storage Temperature :-15 – 45 °C

Storage Relative Humidity :0 – 95 (Non-condensing) %

Storage Elevation :0 – 15240meters

Audible noise at 1 meter from surface of unit :55.0dBA

Online thermal dissipation :931.0BTU/hr

Protection Class :IP20

Conformance

Approvals :CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE

Standard warranty :3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

RoHS :Compliant

Proposition 65 Warning :Available in Documentation tab

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “APC SRT5KXLI Smart-UPS SRT 5000VA 230V – Black”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5